Dear all,

I am new at AbsoluteTelnet.

Why does it show twice 'Enter' when I just press once? Like these:
================================================
/flash/root # ls
dev.sh
/flash/root #
/flash/root # pwd
/flash/root
/flash/root #
/flash/root # echo $PATH
/bin:/sbin:/usr/bin:/usr/sbin:/flash/root:/flash:/usr/local/bin:/usr/local/sbin:/flash:/flash/root
/flash/root #
/flash/root #
=================================================

Each command will be followed by an extra /flash/root #

This problem occurs on the 'Direct to COM' connection. But if I use 'Telnet' to the same device, it seems to be normal.

How should I do for the serial port connection without this problem?

By the way, it's normal if I use other terminal software to connect that device's serial port...

Thanks a lot!!

[size=1][ February 26, 2007, 01:58 AM: Message edited by: wanazai ][/size]

What is your "Enter Sends" setting under VT Options? Have you tested changing this?

Yes!!!!!It works!!!!!

I tried everything but this option...

Thanks a lot!!!! 🙂

No problems. Glad it worked!

/msa

Thanks Mattias for responding quickly to this one. You are correct of course.